Self – smoothing polyurethane screed
Hard wearing, good abrasion resistance
High mechanicals and impact resistance
ARDEX R 74 P is a self-smoothing 4 component polyurethane floor system. Seamless, chemical resistance, high mechanical properties, heat and slip resistance with matt decorative finish.
- Hard-wearing, good abrasion resistance
- High mechanical and impact resistance
- Resist fungi, mildew and bacteria growth
- Non-toxic after cured
- Wide service temperature with ranges from -5℃ to 100℃
Floor coverings:
Lower temperatures and higher RH will prolong the times and can lead to moisture inclusions. The times indicated are based on 18ºC and 65% RH
Substrates:
The substrate must satisfy the requirements of DIN 18365, “Floor covering work”. In particular, it must be level, permanently dry, firm, load-bearing, free from parting agents and cracks and also have a high tensile and compressive strength and must be prepared accordingly. Existing paints, coatings have to be ground prior to the installation. Old adhesives residues have to be removed.
Any levelling work must be done with suitable ARDEX levelling compounds together with ARDEX primers.
Location:
- Food and beverage processing area
- Pharmaceutical plant
- Warehouse and packaging plants
- Battery room
- Electronic component manufacture and assembly
Self – smoothing polyurethane screed
Hard wearing, good abrasion resistance
High mechanicals and impact resistance
ARDEX R 74 P is a self-smoothing 4 component polyurethane floor system. Seamless, chemical resistance, high mechanical properties, heat and slip resistance with matt decorative finish.
- Hard-wearing, good abrasion resistance
- High mechanical and impact resistance
- Resist fungi, mildew and bacteria growth
- Non-toxic after cured
- Wide service temperature with ranges from -5℃ to 100℃
Floor coverings:
Lower temperatures and higher RH will prolong the times and can lead to moisture inclusions. The times indicated are based on 18ºC and 65% RH
Substrates:
The substrate must satisfy the requirements of DIN 18365, “Floor covering work”. In particular, it must be level, permanently dry, firm, load-bearing, free from parting agents and cracks and also have a high tensile and compressive strength and must be prepared accordingly. Existing paints, coatings have to be ground prior to the installation. Old adhesives residues have to be removed.
Any levelling work must be done with suitable ARDEX levelling compounds together with ARDEX primers.
Location:
- Food and beverage processing area
- Pharmaceutical plant
- Warehouse and packaging plants
- Battery room
- Electronic component manufacture and assembly
Self – smoothing polyurethane screed
Hard wearing, good abrasion resistance
High mechanicals and impact resistance
ARDEX R 74 P is a self-smoothing 4 component polyurethane floor system. Seamless, chemical resistance, high mechanical properties, heat and slip resistance with matt decorative finish.
- Hard-wearing, good abrasion resistance
- High mechanical and impact resistance
- Resist fungi, mildew and bacteria growth
- Non-toxic after cured
- Wide service temperature with ranges from -5℃ to 100℃
Floor coverings:
Lower temperatures and higher RH will prolong the times and can lead to moisture inclusions. The times indicated are based on 18ºC and 65% RH
Substrates:
The substrate must satisfy the requirements of DIN 18365, “Floor covering work”. In particular, it must be level, permanently dry, firm, load-bearing, free from parting agents and cracks and also have a high tensile and compressive strength and must be prepared accordingly. Existing paints, coatings have to be ground prior to the installation. Old adhesives residues have to be removed.
Any levelling work must be done with suitable ARDEX levelling compounds together with ARDEX primers.
Location:
- Food and beverage processing area
- Pharmaceutical plant
- Warehouse and packaging plants
- Battery room
- Electronic component manufacture and assembly