Hardware for metal, aluminium or wood folding/ sliding shutters with a panel weight up to 20 kg. Panel width (maximum): 600 mm. Suitable for door panel thickness of 28–36 mm (wood), 28–32 mm (metal/ aluminium).
Features and benefits:
- Designed for inset or overlay mounting.
- Shutters can be folded together and placed sideways at an angle of 90°.
- Can be installed in front of the window or on the exterior of the balcony.
- The folding stack is installed on one side with pivot bearings.
- Variants are available for an odd or even number of panels.
- The folding stack can be pushed sideways against a wall or used free-standing for privacy or protection against wind.
- When the folding sliding shutters have thickness over 32 mm, the hinge knuckles bearing must be recessed - consult manufacturer for details.
- Vertical adjustment (±5 mm).
Components:
Quantities of each component will vary dependent on design required - consult manufacturer for details.
- Top centre trolleys: Two (overlay) or four-wheeled (inlay) trolley with two guide rollers, M8, left or right-hand.
- Fixed suspension unit, left or right-hand.
- Centre guide unit, in the middle or on the outside, left or right-hand.
- Fixed bottom centre guide, left or right-hand.
- Floor guide units with plate, centre or outer, left or right-hand.
- Floor guide units without plate, centre or outer, left or right-hand.
- Fixed floor guide units with plate, left or right-hand.
- Fixed floor guide units without plate, left or right-hand.
Options
Installation/ Design:
Must include the number of panels folding to the right and the number of panels folding to the left. Designs with odd and even numbers of panels are possible. Consult manufacturer for further details.
Top track:
Aluminium, plain anodized, pre-drilled
Bottom guide channel:
Aluminium, plain anodized, undrilled.
Accessories/ Other requirements:
- Hinge, stainless steel, grade 1.4404 (316):
Number of hinges required:
- Up to 1600 mm: Two
- 1601–2400 mm: Three.
- From 2401 mm: Four
Other accessories and spares are also available, consult manufacturer for details.
Hardware for metal, aluminium or wood folding/ sliding shutters with a panel weight up to 20 kg. Panel width (maximum): 600 mm. Suitable for door panel thickness of 28–36 mm (wood), 28–32 mm (metal/ aluminium).
Features and benefits:
- Designed for inset or overlay mounting.
- Shutters can be folded together and placed sideways at an angle of 90°.
- Can be installed in front of the window or on the exterior of the balcony.
- The folding stack is installed on one side with pivot bearings.
- Variants are available for an odd or even number of panels.
- The folding stack can be pushed sideways against a wall or used free-standing for privacy or protection against wind.
- When the folding sliding shutters have thickness over 32 mm, the hinge knuckles bearing must be recessed - consult manufacturer for details.
- Vertical adjustment (±5 mm).
Components:
Quantities of each component will vary dependent on design required - consult manufacturer for details.
- Top centre trolleys: Two (overlay) or four-wheeled (inlay) trolley with two guide rollers, M8, left or right-hand.
- Fixed suspension unit, left or right-hand.
- Centre guide unit, in the middle or on the outside, left or right-hand.
- Fixed bottom centre guide, left or right-hand.
- Floor guide units with plate, centre or outer, left or right-hand.
- Floor guide units without plate, centre or outer, left or right-hand.
- Fixed floor guide units with plate, left or right-hand.
- Fixed floor guide units without plate, left or right-hand.
Options
Installation/ Design:
Must include the number of panels folding to the right and the number of panels folding to the left. Designs with odd and even numbers of panels are possible. Consult manufacturer for further details.
Top track:
Aluminium, plain anodized, pre-drilled
Bottom guide channel:
Aluminium, plain anodized, undrilled.
Accessories/ Other requirements:
- Hinge, stainless steel, grade 1.4404 (316):
Number of hinges required:
- Up to 1600 mm: Two
- 1601–2400 mm: Three.
- From 2401 mm: Four
Other accessories and spares are also available, consult manufacturer for details.
Hardware for metal, aluminium or wood folding/ sliding shutters with a panel weight up to 20 kg. Panel width (maximum): 600 mm. Suitable for door panel thickness of 28–36 mm (wood), 28–32 mm (metal/ aluminium).
Features and benefits:
- Designed for inset or overlay mounting.
- Shutters can be folded together and placed sideways at an angle of 90°.
- Can be installed in front of the window or on the exterior of the balcony.
- The folding stack is installed on one side with pivot bearings.
- Variants are available for an odd or even number of panels.
- The folding stack can be pushed sideways against a wall or used free-standing for privacy or protection against wind.
- When the folding sliding shutters have thickness over 32 mm, the hinge knuckles bearing must be recessed - consult manufacturer for details.
- Vertical adjustment (±5 mm).
Components:
Quantities of each component will vary dependent on design required - consult manufacturer for details.
- Top centre trolleys: Two (overlay) or four-wheeled (inlay) trolley with two guide rollers, M8, left or right-hand.
- Fixed suspension unit, left or right-hand.
- Centre guide unit, in the middle or on the outside, left or right-hand.
- Fixed bottom centre guide, left or right-hand.
- Floor guide units with plate, centre or outer, left or right-hand.
- Floor guide units without plate, centre or outer, left or right-hand.
- Fixed floor guide units with plate, left or right-hand.
- Fixed floor guide units without plate, left or right-hand.
Options
Installation/ Design:
Must include the number of panels folding to the right and the number of panels folding to the left. Designs with odd and even numbers of panels are possible. Consult manufacturer for further details.
Top track:
Aluminium, plain anodized, pre-drilled
Bottom guide channel:
Aluminium, plain anodized, undrilled.
Accessories/ Other requirements:
- Hinge, stainless steel, grade 1.4404 (316):
Number of hinges required:
- Up to 1600 mm: Two
- 1601–2400 mm: Three.
- From 2401 mm: Four
Other accessories and spares are also available, consult manufacturer for details.
Singapore
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
