Door hardware for large wooden folding walls, for panel weights up to 80 kg. Panel width: 500–900 mm. Suitable for door panel thickness of 35–57 mm.
Requires a bottom guide channel, except for two panel installations. Equal panel widths are recommended - consult manufacturer for details.
Features and benefits:
- Quick assembly.
- Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
- Light and quiet running.
- A pivot bearing secures the first panel in the set. The others line up with the stainless steel hinges that bring the panels closer together and minimize the panel stacking space required.
- Attached to every other panel is a folding/ pivot door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
- A communicating pivot door can be added to the panel stack, or the opposing end - consult manufacturer for details.
- Hollow cross-section seal strips eliminate the problem of light penetrating through gaps between panels.
- Choice of locking configurations available.
- Vertical adjustment (±3 mm).
Components:
Quantities of each component will vary dependent on variant specified - consult manufacturer for details.
- Top pivot bearing.
- Folding/ pivot door catch, adjustable.
- Four-wheeled trolley, M10, plastic-tyred wheels and suspension plate.
- Four-wheeled trolley, M10, plastic-tyred wheels with suspension plate and spacer (19533 only).
- Suspension profile, aluminium, 208 mm. Plain anodized, predrilled.
- Thrust bearing for bottom guide channel, including driver.
- Thrust bearing sleeve, 20 mm, including driver.
- Guide, rattle proof, plastic, for bottom guide channel, 24 x 24 mm.
- Cover cap for top fixed suspension, plastic anthracite grey RAL 7016.
- Vertical adjustment key.
- Suspension assembly locking wrench.
- Fork spanner SW 13 mm.
Options
Installation/ Design:
One-sided installations filling an aperture up to 6000 mm width are possible using the one-panel basic sets, supplementary and pivot door sets – or double this figure for two-sided installations. Consult manufacturer for further details.
Running track:
Aluminium, plain anodized, pre-drilled.
Bottom guide channel:
Aluminium, plain anodized, undrilled. Installations with two panels on either side and up to 3.6 m wide are possible without a bottom guide channel, other configurations may require the channel. Consult manufacturer for details.
Hinges:
Stainless steel grade 316 (1.4401) with heavy load bearings and fixing screws.
- Panels up to 2500 mm tall require two hinges.
- Panels up to 3500 mm tall require three hinges.
Locking:
- Additional deadbolt or bar bolt locks may be fitted for safety and to keep out unwanted visitors.
- Both locks engage with floor inserts, or a locking plate.
- Locking from the inside engages the floor-mounted sleeve (13787).
- Mortice locks can be used to secure pivot doors (supplied by others).
Various locking positions and accessories are available including thumbturns and deadbolt lock keys, consult manufacturer for details.
Accessories/ Other requirements:
- Wall attachment:
Version A: With premises-fitted compensation strip and hollow seal (19657).
Version B: Direct wall attachment, requires 6 mm clearance.
Other accessories and spares are also available, consult manufacturer for details.
Door hardware for large wooden folding walls, for panel weights up to 80 kg. Panel width: 500–900 mm. Suitable for door panel thickness of 35–57 mm.
Requires a bottom guide channel, except for two panel installations. Equal panel widths are recommended - consult manufacturer for details.
Features and benefits:
- Quick assembly.
- Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
- Light and quiet running.
- A pivot bearing secures the first panel in the set. The others line up with the stainless steel hinges that bring the panels closer together and minimize the panel stacking space required.
- Attached to every other panel is a folding/ pivot door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
- A communicating pivot door can be added to the panel stack, or the opposing end - consult manufacturer for details.
- Hollow cross-section seal strips eliminate the problem of light penetrating through gaps between panels.
- Choice of locking configurations available.
- Vertical adjustment (±3 mm).
Components:
Quantities of each component will vary dependent on variant specified - consult manufacturer for details.
- Top pivot bearing.
- Folding/ pivot door catch, adjustable.
- Four-wheeled trolley, M10, plastic-tyred wheels and suspension plate.
- Four-wheeled trolley, M10, plastic-tyred wheels with suspension plate and spacer (19533 only).
- Suspension profile, aluminium, 208 mm. Plain anodized, predrilled.
- Thrust bearing for bottom guide channel, including driver.
- Thrust bearing sleeve, 20 mm, including driver.
- Guide, rattle proof, plastic, for bottom guide channel, 24 x 24 mm.
- Cover cap for top fixed suspension, plastic anthracite grey RAL 7016.
- Vertical adjustment key.
- Suspension assembly locking wrench.
- Fork spanner SW 13 mm.
Options
Installation/ Design:
One-sided installations filling an aperture up to 6000 mm width are possible using the one-panel basic sets, supplementary and pivot door sets – or double this figure for two-sided installations. Consult manufacturer for further details.
Running track:
Aluminium, plain anodized, pre-drilled.
Bottom guide channel:
Aluminium, plain anodized, undrilled. Installations with two panels on either side and up to 3.6 m wide are possible without a bottom guide channel, other configurations may require the channel. Consult manufacturer for details.
Hinges:
Stainless steel grade 316 (1.4401) with heavy load bearings and fixing screws.
- Panels up to 2500 mm tall require two hinges.
- Panels up to 3500 mm tall require three hinges.
Locking:
- Additional deadbolt or bar bolt locks may be fitted for safety and to keep out unwanted visitors.
- Both locks engage with floor inserts, or a locking plate.
- Locking from the inside engages the floor-mounted sleeve (13787).
- Mortice locks can be used to secure pivot doors (supplied by others).
Various locking positions and accessories are available including thumbturns and deadbolt lock keys, consult manufacturer for details.
Accessories/ Other requirements:
- Wall attachment:
Version A: With premises-fitted compensation strip and hollow seal (19657).
Version B: Direct wall attachment, requires 6 mm clearance.
Other accessories and spares are also available, consult manufacturer for details.
Door hardware for large wooden folding walls, for panel weights up to 80 kg. Panel width: 500–900 mm. Suitable for door panel thickness of 35–57 mm.
Requires a bottom guide channel, except for two panel installations. Equal panel widths are recommended - consult manufacturer for details.
Features and benefits:
- Quick assembly.
- Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
- Light and quiet running.
- A pivot bearing secures the first panel in the set. The others line up with the stainless steel hinges that bring the panels closer together and minimize the panel stacking space required.
- Attached to every other panel is a folding/ pivot door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
- A communicating pivot door can be added to the panel stack, or the opposing end - consult manufacturer for details.
- Hollow cross-section seal strips eliminate the problem of light penetrating through gaps between panels.
- Choice of locking configurations available.
- Vertical adjustment (±3 mm).
Components:
Quantities of each component will vary dependent on variant specified - consult manufacturer for details.
- Top pivot bearing.
- Folding/ pivot door catch, adjustable.
- Four-wheeled trolley, M10, plastic-tyred wheels and suspension plate.
- Four-wheeled trolley, M10, plastic-tyred wheels with suspension plate and spacer (19533 only).
- Suspension profile, aluminium, 208 mm. Plain anodized, predrilled.
- Thrust bearing for bottom guide channel, including driver.
- Thrust bearing sleeve, 20 mm, including driver.
- Guide, rattle proof, plastic, for bottom guide channel, 24 x 24 mm.
- Cover cap for top fixed suspension, plastic anthracite grey RAL 7016.
- Vertical adjustment key.
- Suspension assembly locking wrench.
- Fork spanner SW 13 mm.
Options
Installation/ Design:
One-sided installations filling an aperture up to 6000 mm width are possible using the one-panel basic sets, supplementary and pivot door sets – or double this figure for two-sided installations. Consult manufacturer for further details.
Running track:
Aluminium, plain anodized, pre-drilled.
Bottom guide channel:
Aluminium, plain anodized, undrilled. Installations with two panels on either side and up to 3.6 m wide are possible without a bottom guide channel, other configurations may require the channel. Consult manufacturer for details.
Hinges:
Stainless steel grade 316 (1.4401) with heavy load bearings and fixing screws.
- Panels up to 2500 mm tall require two hinges.
- Panels up to 3500 mm tall require three hinges.
Locking:
- Additional deadbolt or bar bolt locks may be fitted for safety and to keep out unwanted visitors.
- Both locks engage with floor inserts, or a locking plate.
- Locking from the inside engages the floor-mounted sleeve (13787).
- Mortice locks can be used to secure pivot doors (supplied by others).
Various locking positions and accessories are available including thumbturns and deadbolt lock keys, consult manufacturer for details.
Accessories/ Other requirements:
- Wall attachment:
Version A: With premises-fitted compensation strip and hollow seal (19657).
Version B: Direct wall attachment, requires 6 mm clearance.
Other accessories and spares are also available, consult manufacturer for details.
Singapore
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
